Robelle 1415M Chlorine Tabs Pool Sanitizer, 15-Pounds

Pool sanitization with 3-inch tablets is a comprehensive solution for maintaining the cleanliness and safety of your swimming pool. These tablets are designed for use in feeders or floaters and offer a range of benefits, including killing bacteria, controlling algae, clarifying the water, preventing metal staining and corrosion, and reducing scale formation.

A. Important Notes: 1. Shock your pool every week to maintain a healthy water balance. 2. Factors such as sunlight, rainfall, temperature, number of swimmers, and frequency of pool use can affect the rate of chlorine residual loss. Adjust your cleaning and chemical maintenance accordingly. 3. Use this product in an automatic feeder or floater to ensure consistent and controlled dosing. 4. Do not add other chemicals into the feeder or floater where this product is being used. 5. To avoid damage to the pool surface or materials, do not allow the product to come into direct contact. Do not throw the tablets directly into the pool.

B. Before You Begin: 1. Ensure all pool equipment is working properly. Adjust the stabilizer levels to 40-100 ppm using a stabilizer. 2. Test the water's pH, alkalinity, and calcium hardness, and adjust them to the correct levels. Maintain the pH between 7.4 and 7.6. 3. Check the free available chlorine level and adjust it to 2-4 ppm by adding a granular chlorinating product.

C. Start-Up: 1. If the water is cloudy or green, superchlorinate the pool with an appropriate shock product until the water is clear. 2. Add 16 ounces of this product per 10,000 gallons of pool water to the feeder or floater, then test for the free available chlorine level (allow the water to circulate for at least 4 hours before testing). Adjust the feeder or floater following the manufacturer's instructions to establish a free available chlorine level between 2-4 ppm. 3. When the free available chlorine level is adjusted to 2-4 ppm, add an algaecide.

D. Maintenance: Add 16 ounces of this product per 10,000 gallons of pool water per week, or as often as needed, to the feeder or floater to maintain a constant free available chlorine level of 2-4 ppm. Reentry into the treated swimming pool is prohibited when the free available chlorine levels are above 3 ppm due to the risk of bodily injury.

This 3-inch tablet is a sanitizer, clarifier, stain inhibitor, algae control, descaler, and sunlight protector all in one slow-dissolving tab. Two tablets are recommended per 10,000 gallons of water, and the pH should be maintained between 7.4 and 7.6, with a total alkalinity of 80-130 ppm. These all-in-one swimming pool chlorinating tabs are designed for routine use in automatic chemical feeders or floaters, and each individually wrapped tab weighs 8 ounces. The 15-pound container comes with 30 tabs, providing a convenient and effective solution for maintaining your pool's cleanliness and safety.

product information: