Robelle 2604B Stabilizer and Pool Mate 1-2255B Alkalinity Increaser for Swimming Pools

Robelle Stabilizer and Conditioner for Swimming Pools is a 4 lb product that helps cut chemical loss caused by sunlight. By using this product, customers can save money as it reduces chemical consumption by up to 25%. Robelle Stabilizer and Conditioner helps sustain ongoing chemical residual and disperses rapidly to establish a chemical protection quickly. It stabilizes pool water and extends the life of the chemicals.

To use Robelle Stabilizer and Conditioner, first test the stabilizer concentration in the pool water using a reliable test kit. If the pool is new, refilled, or has no stabilizer, add 4 oz. of this product per 1,000 gallons to achieve the desired 40-100 ppm range. Add the product slowly into the skimmer or premix it in a pail of warm water before adding it directly to the skimmer. Ensure the filter is clean and recirculate the water continuously for 24 hours to dissolve the product completely.

For existing pools, follow the guide below to bring the stabilizer level to the desired range: - For 5,000 gallon pools: - To increase 10ppm, add 6.3 oz. - To increase 20ppm, add 12.5 oz. - To increase 30ppm, add 1.2 lbs. - To increase 40ppm, add 1.6 lbs. - To increase 50ppm, add 2.0 lbs. - For 10,000 gallon pools: - To increase 10ppm, add 12.5 oz. - To increase 20ppm, add 1.6 lbs. - To increase 30ppm, add 2.3 lbs. - To increase 40ppm, add 3.1 lbs. - To increase 50ppm, add 3.9 lbs. - For 20,000 gallon pools: - To increase 10ppm, add 1.6 lbs. - To increase 20ppm, add 3.1 lbs. - To increase 30ppm, add 4.7 lbs. - To increase 40ppm, add 6.3 lbs. - To increase 50ppm, add 7.8 lbs.

Always maintain the chlorine residual in your pool at 2.0-4.0 ppm and pH at 7.4-7.6.

Pool Mate Total Alkalinity Increaser is a 5-pound product used to maintain the proper total alkalinity range in swimming pools. Low total alkalinity can lead to pH fluctuations, equipment and plaster damage, and difficulty in holding chlorine residuals. This product helps boost the effectiveness of pool water disinfectants and aids in preventing scale formation and etching of pool surfaces.

To use Pool Mate Total Alkalinity Increaser, test the total alkalinity with a reliable test kit. The desired range is 70-100 ppm for fiberglass pools, 80-120 ppm for marcite, painted, tile, or exposed aggregate pools, and 120-140 ppm for vinyl pools. If the total alkalinity is less than the desired range, add this product directly to the pool water while the pump is running, following the guide below: - For 5,000 gallon pools: - To increase by 10ppm, add 11.2 oz. - To increase by 20ppm, add 1.4 lbs. - To increase by 30ppm, add 2.1 lbs. - To increase by 40ppm, add 2.8 lbs. - To increase by 60ppm, add 4.2 lbs. - To increase by 80ppm, add 5.6 lbs. - To increase by 100ppm, add 7 lbs.

product information: